AT-Europe SPC Wall Panel – Light Oak

Product detailed description

SPC Wall Panel Light Oak – Natural Light Wood Look

AT-Europe SPC Wall Panel Light Oak is a large-format decorative wall covering combining a rigid SPC core with a decorative PVC surface layer in a light wood design.

The subtle linear wood grain and light shade create a clean and natural appearance suitable for modern, minimalist and naturally styled interiors.

With its large 122 × 280 cm format, one panel covers 3.416 m² and makes it possible to create a large decorative surface with fewer joints.

Rigid SPC Core and Decorative PVC Surface

The panel consists of a rigid SPC composite core with a total nominal thickness of 3 mm.

The surface consists of a decorative PVC layer with a protective finish. The Light Oak design imitates the appearance of light wood but is not a natural wood veneer.

One 122 × 280 cm panel weighs approximately 18.41 kg.

Light Oak Wood Design

Light Oak offers an alternative to traditional marble, stone and concrete designs of large-format SPC panels.

Its light wood appearance is easy to combine with white, beige, grey and black colours, as well as modern furniture, acoustic slat panels and other interior design elements.

Where Can the Light Oak SPC Panel Be Used?

The panel is designed for vertical interior applications and can be used in:

• living rooms,
• bedrooms,
• kitchens,
• bathrooms,
• TV walls,
• home offices and offices,
• hallways and entrance areas,
• commercial interiors.

According to the manufacturer's information, the panel is also suitable for bathrooms and humid areas when installed correctly.

Use in Bathrooms and Shower Areas

The SPC panel can be used on bathroom walls. In areas exposed to direct and continuous water, such as shower enclosures, a suitable waterproofing system must be applied behind the panels and all edges and joints must be thoroughly sealed.

Correct substrate preparation, waterproofing and sealing are essential for reliable installation in wet areas.

Installation with High Tack Adhesive

The panel is installed by bonding it to a clean, dry, stable and properly prepared substrate.

The manufacturer recommends using a High Tack adhesive with high initial grab. The adhesive manufacturer's instructions must be followed, and the specific type of substrate should be taken into account.

The panel can be cut to the required dimensions and suitable finishing or joining profiles can be used depending on the installation.

Heat Resistance

According to the supplied technical documentation, the material achieved a Heat Distortion Temperature (HDT) of 75.2 °C, tested according to TS EN ISO 75-1 / TS EN ISO 75-2.

Easy Maintenance

For regular cleaning, use a soft cloth and a mild cleaning product.

Do not use abrasive cleaning tools, strong solvents or aggressive alkaline cleaning agents.

What Are the Dimensions and Weight of the Light Oak SPC Panel?

The panel measures 122 × 280 cm, has a thickness of 3 mm and weighs approximately 18.41 kg. One panel covers an area of 3.416 m².

What Is the Panel Made Of?

The panel has a rigid SPC composite core and a decorative PVC surface layer with a protective finish.

Is Light Oak Real Wood?

No. Light Oak is an SPC panel with a decorative surface in a wood look. It is not solid wood or natural wood veneer.

Is the Light Oak SPC Panel Suitable for Bathrooms?

Yes. According to the manufacturer's information, the panel is suitable for interior bathroom walls and humid areas when installed correctly.

Can the SPC Panel Be Used in a Shower Area?

Yes, but in areas exposed to direct and continuous water, a suitable waterproofing system must be installed behind the panels and all edges and joints must be thoroughly sealed.

What Adhesive Should Be Used for the SPC Panel?

The manufacturer recommends a High Tack adhesive with high initial grab. The specific adhesive should also be selected according to the type and condition of the substrate.

Can the Panel Be Cut?

Yes. The panel can be cut to the required dimensions according to the specific installation.

Is the Panel Suitable for Flooring?

No. This product is designed for vertical wall applications and is not intended for use as flooring.

Is the Panel Suitable for Exterior Use?

No. The panel is designed for use on interior walls.

📍 See the Light Oak SPC Panel in Person

Would you like to see the actual shade and surface of the Light Oak design? Visit our showroom and warehouse in Rovinka or Prešov.

You can see the panel in person and compare its wood design with other PVC and SPC wall panels.

⚠ We recommend arranging your visit to our showroom and warehouse in Prešov in advance.

👉 See also our other matte SPC wall panels.