Flexible Stone Cladding FS-106 White Linear Stone – 120 × 300 cm

Product detailed description

FS-106 White Linear Stone – modern stone appearance in a large format

FS-106 White Linear Stone is a flexible stone cladding designed for projects where the appearance and texture of natural stone are desired without the weight and installation demands of conventional thick stone slabs.

Its light colour is complemented by a characteristic vertical linear relief, which gives the surface more depth and distinguishes FS-106 from our smoother stone designs.

The large 120 × 300 cm format allows substantial wall areas to be covered with fewer joints, producing a cleaner and more continuous architectural appearance.

Distinctive three-dimensional linear texture

The main visual characteristic of FS-106 is its vertically structured surface.

Unlike completely flat stone-effect panels, the fine linear relief interacts with light and shadow and makes the wall visually more dynamic.

The neutral light colour also makes the design easy to combine with wood, concrete, black details and modern architectural elements.

Where can FS-106 be used?

FS-106 is suitable for both interior and exterior applications.

Typical applications include:

• exterior façades,
• entrance areas,
• feature walls,
• living rooms,
• reception areas,
• offices,
• hotels,
• restaurants,
• commercial interiors,
• columns and architectural elements.

For exterior installation, proper substrate preparation, a suitable flexible adhesive and correct treatment of joints are important.

Large 120 × 300 cm format

One of the main advantages of the large-format version is the ability to cover approximately 3.6 m² with a single panel.

Compared with small-format stone cladding, this means fewer joints and creates a more uniform surface.

The large format is especially attractive for modern façades and large interior feature walls where a visually continuous finish is preferred.

Lightweight and flexible alternative to traditional stone

Traditional natural stone can be heavy and demanding to transport, cut and install.

Flexible stone cladding provides a significantly thinner and lighter solution while maintaining a mineral, stone-inspired appearance and textured surface.

Its flexibility also makes it suitable for selected architectural elements where conventional rigid slabs would be more difficult to use.

Cutting and installation

The panel can be cut to the required dimensions using suitable tools for stone-based materials.

For installation, we recommend using a flexible cement-based adhesive suitable for stone cladding and the specific substrate and environment.

The substrate should always be:

• solid,
• dry,
• clean,
• stable,
• and sufficiently level.

For large-format 120 × 300 cm panels, installation by at least two people is recommended due to the panel dimensions and easier positioning.

This last sentence should link directly to your installation article:

Ako nalepiť flexibilný kamenný obklad – kompletný návod krok za krokom

Important: I would only include technical values that you have actually confirmed with the supplier. In particular, I would not add a numerical water-absorption value, “100% waterproof”, “watertight” or “non-absorbent” without documentation.

Installation

For the best result, the substrate must be properly prepared before installation. It should be solid, dry, clean and level.

Apply a suitable flexible cement-based adhesive evenly according to the adhesive manufacturer's instructions. Carefully position the panel and press it evenly onto the prepared substrate.

For exterior applications, particular attention should be paid to substrate preparation, adhesive selection and correct treatment of joints.

Because of the 120 × 300 cm dimensions, we recommend handling and installing the panel with at least two people.

This is another natural internal link to the installation article, but if the first installation-guide link is already close by, one link is enough. We do not need to force the same internal link repeatedly.

Care and maintenance

Flexible stone cladding does not require complicated maintenance.

For normal cleaning, use:

• a soft microfiber cloth,
• a soft brush,
• clean water,
• or a mild pH-neutral cleaning product.

Avoid aggressive acidic or alkaline cleaners, steel brushes and strongly abrasive cleaning products that could damage the decorative surface.

FAQ

Is FS-106 suitable for exterior use?

Yes. FS-106 flexible stone cladding is suitable for both interior and exterior applications. For exterior installation, the substrate must be properly prepared and an appropriate adhesive and joint-treatment system should be used.

Can FS-106 be used on a façade?

Yes. Its large format and stone appearance make FS-106 particularly suitable for modern façade applications. Correct installation and substrate preparation are essential for exterior use.

Can I use it in a bathroom?

It can be used on bathroom walls outside areas with permanent or direct water exposure. For shower areas or other locations continuously exposed to water, we would not recommend the application without an appropriately designed waterproofing and installation system.

How large is one panel?

One panel measures 120 × 300 cm and covers approximately 3.6 m².

How thick is the panel?

The panel is approximately 3.7 mm thick.

Can the panel be cut?

Yes. Flexible stone cladding can be cut to the required dimensions using an appropriate cutting tool suitable for stone-based materials.

Can I install a 120 × 300 cm panel myself?

Technically possible, but because of its large dimensions, we recommend installation by at least two people. This makes positioning the panel significantly easier and reduces the risk of damage during handling.

Is it real natural travertine?

For FS-106 specifically, I would NOT write “natural travertine.” Its appearance is stone-like and its linear relief may visually resemble certain natural stone surfaces, but unless the supplier specifically identifies FS-106 as travertine, we should market it as White Linear Stone / flexible stone cladding, not claim that it is natural travertine.

Transform your wall with flexible stone

Create a modern stone appearance without the weight and installation complexity of traditional thick stone slabs.

Explore FS-106 White Linear Stone and our other flexible stone designs for interiors, façades and architectural projects.

👉 View all Flexible Stone cladding