Parabond 600 – High Tack Adhesive for PVC Wall Panels, White 290 ml

Product detailed description

Parabond 600 – Professional High Tack Adhesive for PVC Wall Panels

Parabond 600 by DL Chemicals is a hybrid polymer mounting adhesive with high initial tack. It is designed for strong, elastic bonding of various construction materials to suitable porous and non-porous substrates.

It can be used when installing compatible PVC wall panels, provided the adhesive, panel backing and substrate are suitable for the application.

Main Benefits

• High initial tack of at least 250 kg/m², according to the manufacturer

• Permanently elastic bond

• Good adhesion to a wide range of construction materials

• Suitable for dry and slightly damp substrates

• Solvent-, isocyanate-, silicone- and phthalate-free

• Non-corrosive when bonding metals

• Good UV resistance

• Paintable with compatible coatings

• Low odour

Installing PVC Wall Panels

Parabond 600 can be used for bonding suitable PVC wall panels onto stable, clean and properly prepared substrates.

Before installation, check compatibility with the specific PVC panel and wall surface. Remove dust, grease and loose material. Apply the adhesive according to the manufacturer's technical instructions.

For large-format wall panels, follow the relevant installation requirements and allow sufficient curing time.

Important Information

The stated initial tack is a laboratory performance characteristic and does not represent the permissible load of an installed wall panel.

For bathrooms and other wet areas, panel joints, corners and edges must be sealed separately using appropriate waterproof sealing materials.

Frequently Asked Questions – Parabond 600

Is Parabond 600 suitable for PVC wall panels?

Parabond 600 is a high-tack hybrid polymer adhesive that we also offer for installing PVC wall panels. Compatibility with the specific panel backing and substrate must be checked before installation.

What is the difference between Parabond 600, 800 and 900 Rapid Power?

Parabond 600 offers an initial tack of at least 250 kg/m². Parabond 800 offers at least 400 kg/m², while Parabond 900 Rapid Power offers at least 500 kg/m² and develops handling strength in approximately 20 minutes under specified conditions.

These values do not represent the safe load capacity of an installed panel.

Can Parabond 600 be applied to a slightly damp surface?

Yes. According to the manufacturer, it can be applied to dry and slightly damp substrates. The surface must be stable, clean and properly prepared.

Can I use Parabond 600 in a bathroom?

It may be used in suitable humid-area applications under the manufacturer's conditions. PVC panel joints, corners and edges require separate sealing.

How much adhesive do I need for one PVC panel?

Consumption depends on panel dimensions, substrate condition and application pattern. Follow the adhesive technical data sheet and the panel installation instructions.

Related Products and Guides

• PVC and SPC wall panels

  Wall panel adhesives

Need help choosing an adhesive? Contact AT-Obklad for advice on a suitable installation solution.