Paracol Superglue F – Fast-Acting Instant Adhesive, 20 g

Product detailed description

Paracol Superglue F – Fast and Precise Instant Adhesive for Small Repairs

Paracol Superglue F by DL Chemicals is a single-component, solvent-free liquid cyanoacrylate adhesive designed for rapid bonding of small parts made from various materials.

It is particularly suitable for applications requiring a precise, strong bond between closely fitting surfaces.

The adhesive cures rapidly, typically within 3–20 seconds, depending on the material and application conditions. Maximum bond strength is generally achieved after approximately 24 hours.

Main Benefits

• Rapid initial curing in approximately 3–20 seconds

• High bond strength

• Single-component formula, ready to use

• Solvent-free

• Good moisture resistance after curing

• Maintains bond strength at low temperatures

• Precise application to small components

• Suitable for various compatible materials

• Convenient 20 g bottle

Suitable Materials and Applications

Paracol Superglue F can be used for bonding small, closely fitting components made from:

• Selected plastics

• Rubber and certain rubber-based materials

• Wood

• Paper

• Leather

• Metals

The product may also be used with more difficult materials such as EPDM and polypropylene, subject to a successful adhesion test.

Important: Not all plastics behave the same way. Always check compatibility and bond strength before use, particularly on low-surface-energy plastics.

Fast Curing and Strong Bonds

Paracol Superglue F begins to cure within seconds after the parts are joined.

Its rapid action makes it useful for small repairs and precision bonding where extended clamping times would be inconvenient.

For best results, the surfaces should fit closely together without large gaps. Allow approximately 24 hours before subjecting the bond to full mechanical stress.

How to Apply Paracol Superglue F

1. Make sure both bonding surfaces are clean, dry, sound and free from dust, grease and loose particles.

2. If necessary, degrease the surfaces with a cleaner suitable for the material.

3. Apply a small drop of adhesive to one bonding surface.

4. Immediately join the parts and press them together briefly.

5. Avoid repositioning the parts once they have been joined.

6. Allow approximately 24 hours before applying full load to the bond.

Application tip: Use only the amount of adhesive needed. Excessive application does not necessarily improve bond strength.

Technical Characteristics

Paracol Superglue F is a solvent-free liquid adhesive based on ethyl cyanoacrylate.

The following technical values are indicative manufacturer data:

• Chemical base: Ethyl cyanoacrylate mixture

• Consistency: Liquid

• Colour: Transparent

• Density: Approximately 1.06 g/ml

• Viscosity: Approximately 100 mPa·s

• Initial curing time: 3–20 seconds

• Time to maximum bond strength: Approximately 24 hours

• Tensile strength: Approximately 21 N/mm², according to ISO 6922

• Temperature resistance after curing: −50 °C to +80 °C

• Flash point: Above 85 °C

• Solvents: None

Actual bonding performance depends on the substrate, surface preparation, adhesive quantity and application conditions.

Storage and Safety

Store unopened containers in a cool, dry place between +5 °C and +25 °C, protected from direct sunlight.

The stated shelf life is 12 months when stored in the original, unopened packaging under the recommended conditions.

The manufacturer supplies the product in cartons containing ten 20 g bottles. This listing is for one individual 20 g bottle.

Safety warning: Cyanoacrylate adhesives can bond skin and eyes within seconds. Avoid contact with skin and eyes, ensure adequate ventilation and keep out of reach of children. Read the product label and safety data sheet before use.

Is Paracol Superglue F Suitable for Installing PVC Wall Panels?

Paracol Superglue F is intended for bonding small components, not for installing large-format wall panels over broad surfaces.

For installing our large-format PVC wall panels, we recommend a suitable mounting adhesive such as Parabond 900 Rapid Power.

Explore our Installation Accessories – Adhesives, Profiles and More category for additional adhesives, sealants and installation products.

Frequently Asked Questions – Paracol Superglue F

How quickly does Paracol Superglue F cure?

The initial curing time is approximately 3–20 seconds. Maximum bond strength is generally reached after about 24 hours.

Can I use it on plastic?

Yes, on compatible plastics. For difficult-to-bond materials such as polypropylene, an adhesion test is recommended.

Is it suitable for bonding metal?

Yes. It can be used for small metal components with clean, closely fitting surfaces.

Can it bond wood and leather?

Yes. Both wood and leather are among the materials listed for this adhesive. Test first on sensitive or highly porous surfaces.

Is the adhesive moisture-resistant?

The cured adhesive offers good moisture resistance. This does not automatically mean it is suitable for permanent immersion in water.

What temperature range can the cured adhesive withstand?

The stated temperature resistance is approximately −50 °C to +80 °C.

Can I use it to fill large gaps?

No. This liquid instant adhesive is designed primarily for closely fitting surfaces, not for filling large gaps.

Can it be used to install PVC wall panels?

No. It is not intended for full-surface installation of large-format panels. Use an appropriate mounting adhesive such as Parabond 900 Rapid Power.

Does it contain solvents?

No. It is a solvent-free cyanoacrylate adhesive.

Need a Quick and Precise Bond for Small Parts?

Paracol Superglue F 20 g is a convenient instant adhesive for small repairs involving compatible plastic, rubber, wood, leather and metal components.

Not sure whether it is suitable for your material? Contact us – we will be happy to help you choose the right adhesive.